What is the typical pH range for drinking water in Malta?

The pH of drinking water in Malta generally falls within the range of 6.5 to 8.5, as recommended by the World Health Organization (WHO) and the European Union's Drinking Water Directive. This range is considered optimal for human consumption and indicates that the water is neither too acidic nor too alkaline.

Is the pH level of Malta's drinking water regulated?

Yes, the pH level of drinking water in Malta is regulated to ensure it meets the standards set by the European Union's Drinking Water Directive, which Malta, as an EU member state, adheres to. These regulations aim to protect public health and ensure the water is palatable and does not cause corrosion in the distribution system.

Does the pH level of drinking water in Malta vary?

Slight variations in the pH level of Malta's drinking water can occur depending on the source of the water (groundwater, desalinated water, or blends), the treatment processes used, and the location within the distribution network. However, these variations are typically within the acceptable range of 6.5 to 8.5.

How does TAPP Water filtration affect the pH of Malta's drinking water?

TAPP Water filters are primarily designed to remove contaminants such as chlorine, heavy metals, and microplastics. They generally do not significantly alter the pH level of the water. The filtered water's pH will typically remain close to that of the incoming tap water, which is within the acceptable range in Malta.

Why is pH level important in drinking water?

The pH level of drinking water is important for several reasons. Water that is too acidic (low pH) can be corrosive to pipes and may leach metals, while water that is too alkaline (high pH) can have an unpleasant taste. Maintaining a neutral to slightly alkaline pH is best for human health and the water distribution system.

How can I find the specific pH level of my tap water in Malta?

The most reliable way to find the specific pH level of your tap water in Malta is to check the water quality reports published by the Water Services Corporation (WSC), which is the main water provider in Malta. These reports often include information on various water quality parameters, including pH levels. You can usually find these reports on the WSC website.

Can TAPP Water filters help if my water's pH is outside the normal range?

TAPP Water filters are not specifically designed to adjust the pH of water. If your tap water's pH is consistently outside the normal range, it's advisable to contact the Water Services Corporation to inquire about the issue. They are responsible for ensuring the public water supply meets the required quality standards.

Are there any health concerns associated with the typical pH of Malta's drinking water?

No, the typical pH range of 6.5 to 8.5 for drinking water in Malta is considered safe for consumption and does not pose any direct health concerns. It falls within the internationally recognized optimal range for drinking water.

Get help | What is the PH for Malta drinking water?

TAPP EcoPro in Malta has been independently tested and the results are give in this article.

The PH of the water from Malta public water supply was tested at 8.93 BEFORE filtration and 9.3 AFTER filtration.

Read more about Malta's wonderful alkaline mineral water.

https://tappwater.mt/blogs/news/explainer-maltas-wonderful-alkaline-drinking-water

TAPP Water filters

EcoPro

EcoPro

Regular price From €59,00 EUR

Regular price Sale price From €59,00 EUR
EcoPro Compact

EcoPro Compact

Regular price From €49,00 EUR

Regular price Sale price From €49,00 EUR
ShowerPro Diamond

ShowerPro Diamond

Regular price From €49,00 EUR

Regular price Sale price From €49,00 EUR
Ultra

Ultra

Regular price From €59,00 EUR

Regular price Sale price From €59,00 EUR

1 4

View all

Get help | What is the PH for Malta drinking water?

TAPP Water filters

Subscribe to our emails